Search results for "Atomic fluorescence spectrometry"

showing 7 items of 7 documents

Determination of As, Sb, Se, Te and Bi in milk by slurry sampling hydride generation atomic fluorescence spectrometry

2003

A simple and fast analytical procedure has been developed for the determination of As, Sb, Se, Te and Bi in milk samples by hydride generation atomic fluorescence spectrometry (HG-AFS). Samples were treated with aqua regia for 10min in an ultrasound water bath and pre-reduced with KBr for total Se and Te determination or with KI and ascorbic acid for total As and Sb, the determination of Bi being possible in all with or without pre-reduction. Slurries of samples, in the presence of antifoam A, were treated with NaBH(4) in HCl medium to obtain the corresponding hydrides, and AFS measurements were processed in front of external calibrations prepared and measured in the same way as samples. Re…

Detection limitchemistry.chemical_compoundchemistryHydrideRelative standard deviationSlurryAnalytical chemistryAqua regiaChemical elementAscorbic acidAtomic fluorescence spectrometryAnalytical ChemistryTalanta
researchProduct

Determination of inorganic species of Sb and Te in cereals by hydride generation atomic fluorescence spectrometry

2011

A non-chromatographic fast, sensitive and easy method has been developed for the determination of Sb(III), Sb(V), Te(IV) and Te(VI) in cereal samples. The procedure is based on ultrasound assisted extraction and determination by hydride generation atomic fluorescence spectrometry (HG AFS). Preliminary studies were made in order to get the best extraction efficiency using 1 mol L-1 phosphoric acid, 1 mol L-1 nitric acid, aqua regia, 1 mol L-1 sulfuric acid and 6 mol L-1 hydrochloric acid. The extraction with aquaregia showed a clear interconversion of the species during the process, being H2SO4 the best extractant with efficiencies greater than 90% from the total content of Sb and Te quantif…

Detection limitcerealshydride generation atomic fluorescence spectrometryChemistryHydrideantimonyExtraction (chemistry)Hydrochloric acidSulfuric acidGeneral Chemistrychemistry.chemical_compoundspeciationNitric acidtelluriumAqua regiaPhosphoric acidNuclear chemistry
researchProduct

Multicommutation as an environmentally friendly analytical tool in the hydride generation atomic fluorescence determination of tellurium in milk.

2003

The aim of this study is to show the advantages of the emerging multicommutation methodology based on the use of solenoid valves for Te determination in milk by hydride generation atomic fluorescence spectrometry (HG-AFS). The delivery of a series of alternating sequential insertions of small volumes of samples and reagents gives rise to new hydrodynamic processes and exciting analytical potentials by controlling the time of flow through the on/off-switched solenoid valves. This drastically reduces the reagent consumption by a factor of 4 and the generation of effluents (590 mL h(-1) instead of 750 mL h(-1) generated by the continuous-mode measurement) and also provides an improvement in th…

Detection limitTime FactorsHydrideSpectrophotometry AtomicAnalytical chemistrychemistry.chemical_elementSolenoidBiochemistryAtomic fluorescence spectrometryEnvironmentally friendlyAnalytical ChemistrySonicationMilkchemistryReagentCalibrationCalibrationAnimalsRegression AnalysisTelluriumTelluriumMicrowavesHydrogenAnalytical and bioanalytical chemistry
researchProduct

Hydride generation atomic fluorescence spectrometric determination of ultratraces of selenium and tellurium in cow milk

2003

Abstract A sensitive procedure has been developed for selenium and tellurium determination in milk by hydride generation atomic fluorescence spectrometry (HG-AFS) after microwave-assisted sample digestion. The method provides sensitivity values of 1591 and 997 fluorescence units ng−1 ml−1 with detection limits of 0.005 and 0.015 ng ml−1 for Se and Te, respectively. The application of the developed methodology to the analysis of cow milk samples of the Spanish market evidenced the presence of concentration ranges from 11.1 to 26.0 ng ml−1 for Se, and from 1.04 to 9.7 ng ml−1 for Te having found a good comparability with data obtained after dry-ashing of samples.

Detection limitChromatographyHydrideMicrowave ovenchemistry.chemical_elementBiochemistryAtomic fluorescence spectrometryFluorescenceAnalytical ChemistryCow milkchemistryEnvironmental ChemistryTelluriumSpectroscopySeleniumAnalytica Chimica Acta
researchProduct

Determination of total arsenic in soft drinks by hydride generation atomic fluorescence spectrometry

2007

Abstract A highly sensitive and simple method has been developed for the determination of total arsenic, by continuous hydride generation and atomic fluorescence spectrometry (HGAFS), in refreshing drink samples as colas, teas and fruit juices. Samples were mixed with concentrated HCl and KI to obtain final concentrations of 2 mol l−1 and 1%, respectively. These solutions were aspirated and merged with a reducing NaBH4 3% (m/v) solution, with sample and NaBH4 flow rates of 12.5 and 1.5 ml min−1, respectively. The hydride generated in a 170 cm reaction coil was transported to the detector with an Ar flow of 400 ml min−1. The recovery values of added concentrations, from 0.1 to 0.9 ng ml−1, o…

Detection limitChromatographyChemistryHydrideFluorescence spectrometryAnalytical chemistrychemistry.chemical_elementGeneral MedicineAtomic fluorescence spectrometryAnalytical ChemistryHighly sensitiveVolumetric flow rateAshingArsenicFood ScienceFood Chemistry
researchProduct

Atomic fluorescence spectrometric determination of trace amounts of arsenic and antimony in drinking water by continuous hydride generation

1999

A highly sensitive and simple method has been developed for the determination of As(III), total As, Sb(III) and total Sb in drinking water samples by continuous hydride generation and atomic fluorescence spectrometry (HGAFS). For As determination, water samples aspirated in a carrier of 2 mol l(-1) HCl were merged with a reducing NaBH(4) 3%(m/v) solution, with sample and NaBH(4) flow rates of 12.5 and 1.5 ml min(-1) respectively. The hydride generated in a 170 cm reaction coil was transported to the detector with an Ar flow of 400 ml min(-1), and a limit of detection between 5 and 20 ng l(-1) was obtained. For Sb determination, 2.5 mol l(-1) HCl and 2%(m/v) NaBH(4) were employed, with respe…

Detection limitchemistryAntimonyTrace AmountsHydrideAnalytical chemistrychemistry.chemical_elementIodineAtomic fluorescence spectrometryArsenicAnalytical ChemistryVolumetric flow rateTalanta
researchProduct

Determination of ultratrace bismuth in milk samples by atomic fluorescence spectrometry.

2003

Abstract A sensitive procedure was developed for determination of bismuth (Bi) in milk samples by hydride generation atomic fluorescence spectrometry (HG–AFS) after microwave-assisted sample digestion with HNO3 and H2O2. The method provides a sensitivity of 1832 fluorescence units (ng/mL) with a detection limit of 0.01 ng/mL, which corresponds to 20 pg absolute limit of detection, equivalent to 0.50 ng/g in the original sample. Application of the methodology to cow milk samples from the Spanish market showed the presence of Bi at a concentration of 11.8–28.8 ng/g, which compared well with data obtained after dry ashing of samples and with data obtained by inductively coupled plasma–mass spe…

Quality ControlAnalytical chemistrychemistry.chemical_elementBorohydridesMass spectrometryAtomic fluorescence spectrometrySensitivity and SpecificityFluorescenceAnalytical ChemistryBismuthCow milkDigestion (alchemy)Environmental ChemistryAnimalsArgonMicrowavesPharmacologyDetection limitHydrideSpectrum AnalysisMilkAshingchemistrySpainIndicators and ReagentsAgronomy and Crop ScienceBismuthFood ScienceJournal of AOAC International
researchProduct